Denso BHT-500B User Manual

Contents

Denso BHT-500B User Manual Manual pdf 4 page image

iiiBHT-500BAbout this Manual Due to improvements and so on, the content of this manual may be subject to change without prior notice. The reproduction or duplication of the whole or part of this manual is strictly prohibited without prior consent. Every attempt has been made to ensure that the content of this manual is thorough and up to date, however, wekindly ask that any questionable content, mistakes, or omissions be reported to DENSO WAVE. The copyright for this User’s Manual belongs to DENSO WAVE INCORPORATED.Manual CompositionThis manual is made up of the following 9 chapters.Chapter 1 OutlineDescribes the BHT system and provides an overall outline of the BHT.Chapter 2 BHT PreparationDescribes information required by the user and procedures that must be performed prior tocommencing operation.Chapter 3 Basic OperationDescribes basic operations performed by the operator and how to make basic changes to settings suchas the beeper volume.Chapter 4 System OperationDescribes how to initialize and update the system, start up a user program, and operate System Mode.Chapter 5 CommunicationDescribes interfaces and communication specifications.Chapter 6 MaintenanceDescribes battery cartridge replacement and daily procedures for taking care of the BHT.Chapter 7 Error MessagesDescribes causes and countermeasures for error messages expected to occur during basic operation.Chapter 8 SpecificationsDescribes specifications for hardware, readable barcodes, and interfaces.Appendices-1 CU-500 Specifications (Option)Describes the main specifications for the CU-500 Series (option).Appendices-2 When File Transfer is Not Possible Using the Transfer UtilityDescribes causes and countermeasures when unable to transfer files.