DentalEZ RAM VAC Osprey User Manual
                                         | |
Contents
| 
23www.DentalEZ.com 866-DTE-INFO23PN: 1045DOC_EEnable High-Pressure ModeSection IV OperationHigh-pressure mode on the Osprey compressor isenabled by using the control buttons located onthe C2 smart control panel (Figure 13).To enable high-pressure mode:1. Press NEXT button to cycle through the menuscreens. Stop at the screen that displays HIPRESSURE MODE OFF (Figure 14).NOTE: This will require seven to nine presses,based on the model of Osprey being operated.2. Press and hold RESET button for 10 seconds.The screen will now display HI PRESSUREMODE ON 105 130 PSI (Figure 15).3. Press NEXT button. Screen will display thiswarning: IN HI PRESS MODE OWL COMDISABLED. This indicates that the On WallLogic (OWL) Smart Hub is in high-pressuremode and will have limited functionality withthe compressor (Figure 16).Figure 14. Press NEXT button to cycle to screenFigure 15. Press and hold RESET button for 10 secondsFigure 16. Press NEXT buttonHigh-pressure mode should only be activatedwhen supplying air to a dedicated millingmachine that requires higher pressure.CAUTION 4. Press NEXT button again to return to the mainscreen.Figure 13. Osprey compressor C2 smart control panelControlButtonsElectronicDisplay |
Related manuals for DentalEZ RAM VAC COSP22S
manualsdatabase
Your AI-powered manual search engine