Denver Instrument P-114 Operation Manual
Also see for P-114: Operating instructions
                                              | |
Contents
| 
Environmental SettingsYour balance can be set up for optimized weighing to compensatefor varying conditions including vibration and drafts.Adjusting Filter SettingsThe filter setting is set to take a number of readings and display theaverage on the screen. If you are in a very stable environment (i.e.on a marble slab and away from the heating/cooling system) thereis no need to perform a high amount of filtering this also allows fora quicker response time. On the contrary, if the balance is in anunstable environment (i.e. on a production floor) quite a bit of fil-tering may be needed to give good results.1. Press MENU.2. Press the until “Environment” is highlighted, press the .3. Press the until “Filter” is highlighted, press the .4. Press or arrow until the desired filter setting is highlighted(low, normal or high) and press ENTER.5. Press the TARE key to return to the measurement screen, or toreturn to the main menu..28ApplicationsUnitsEnvironmentGLP/ISOPrintLanguageSystemStandbyFilterStabilityAuto ZeroSystem Screen |
manualsdatabase
Your AI-powered manual search engine