49Declarations of ConformityCouncil Directives of the EU andEuropean Standards:This Denver balance meets therequirements of the following Direc-tives issued by the Council of theEuropean Union.Council Directive 89/336/EEC“Electomagnetic compatibility(EMC)”Important Note:The operator shall be responsiblefor any modifications to Denverequipment and for any connectionsof cables or equipment not suppliedby Denver and must check and, ifnecessary, correct these modifica-tions and connections.On request, Denver will provide infor-mation on the minimum operatingspecifications (in accordance with theStandards listed above for definedimmunity to interference).73/23/EEC “Electrical equipmentdesigned for use within certainvoltage limits”If you use electrical equipment ininstallations and under ambientconditions requiring higher safetystandards, you must comply with theprovisions as specified in the appli-cable regulations for installationsin your country.For information on the current legalrequirements of your country, pleasecontact your local Denver customerservice office.Additional Directive for WeighingInstruments Used in Legal Metrology:Directive 90/384/EEC “Non-automaticweighing instruments”This Directive also regulates the per-formance of the EC verification by themanufacturer, provided that an ECType-Approval Certificate has beenissued and the manufacturer hasbeen accredited by an officer of aNotified Body registered at the Com-mission of the European Communityfor performing such verification. OnFebruary 15, 1993, the manufacturersreceived accreditation for performingverification.Subsequent Verifications within theEuropean CountriesThe validity of the verification willbecome void in accordance with thenational regulations of the country inwhich the balance is used. For infor-mation on verification and legal regu-lations currently applicable in yourcountry, and to obtain the names ofthe persons to contact, please contactyour local Denver office, dealer orservice center.