Desa HFL300 SERIES Installation Instructions Manual

Contents

installation instructions

Save for future reference.For more information, visit www.desatech.comHFL300 SERIES BRICK LINER KITINSTALLATION INSTRUCTIONSIMPORTANT: Read entire instruction sheetbefore installing brick liner.This brick liner accessory is approved foruse in Series 4 32" vent-free gas fireplacesand fireboxes. Do not use brick liner ac-cessory in any other fireplace models.The Brick Liner Kit contains the following:• 1 - Rear Firebrick Panel• 2 - Side Firebrick Panels• 2 - Retainer Brackets• 2 - #10 ScrewsTools required:• Phillips Screwdriver• 5/16" Hex Socket Wrench or Nut DriverIf any of these parts are missing or damaged,contact dealer where you purchased this kit. Ifthey cannot supply original replacement parts,either contact your nearest Parts Central or callDESA Heating Products at 1-866-672-6040 forinformation.IMPORTANT: Always handle firebrick panelswith two hands.WARNING: Turn off, unplug,and let fireplace cool beforeinstalling brick liner. Only aqualified service person shouldservice and repair fireplace.NOTICE: You must remove logbase assembly before installingbrick liner.1. To remove screen, lift screen up off the screwsin front of fireplace (see Figure 1).Figure 1 - Removing Fireplace ScreenScrewsforMountingScreen

/ 4

Related manuals for Desa HFL300 SERIES