Duevi CE 60-3 GSM Installer Manual
Also see for CE 60-3 GSM: User guide
                                       | |
Contents
| 
21 CE60-3GSM - Installer7.3. Learning siren tamper (only for SIRR-A/B v2)Chose an empty sensor memory location.Push the “#” key for at least 3 seconds and no more than 6 seconds: the control panel will sendto siren a request to transmit its own tamper code; the siren will send its code that will then belearned.Learning *_Radio Code 02 PProvoke an alarm signal ONLY from the sensor to be memorized, so thatit transmits its code to the control panel.Learning *XRadio Code 02 PIf the control panel receives a signal from the sensor correctly, it willconfirm its memorization with an “X” in the place of “_”.If the memory is not possible the control panel will emit three “beeps”.Learning *0Radio Zone 02 POnce positioned in the desired zone:Press “X” key quickly > You will see “_”: the control panel is now ready foranother sensor code to be programmed.Hold down “X” key > Delete the current sensor.In the selected memory location you could find the following symbols:after “Learning”:“X” = already a memorized sensor in this location.“0” = free memory location.after “Radio Zone…”“P” = perimeter type sensor.“T” = volumetric type sensor (PIR).X# |
Related manuals for Duevi CE 60-3 GSM
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine