Dux Proflo 80F1 Owner's Manual

Also see for Proflo 125S1: Owner's manual

Contents

Dux Proflo 80F1 Owner's Manual Manual pdf 7 page image

Owner’s Manual – Proflo Electric Storage Water Heaters5H0421 0421 Rev. GPlumbing Connectionsbetween the non return valve and thewater heater. See the diagram below fordetails.Hot Water ConnectionThe hot water pipe should be connectedto either of the RP¾/20 sockets markedOUTLET at the top of the unit. For themost economical operation of the waterheater, it is recommended that all hotwater lines are insulated. Please checklocal regulations regarding the use ofhot water supply pipework that are notmade of copper.Insulation of PipesAll hot water pipes must be insulatedwith UV stabilized insulation suitablefor solar working temperatures, e.g.Armaflex Insulation.Note: a combined isolating valve/non-return valve/line strainer may be used.Expansion valve only required where local regulations demand.UnionConnectionNon-returnValveLineStrainerCold WaterInletDrainExpansionValveIsolating Valve(Spindle Vertical)Inlet ConnectionsTemperature ProtectionWater heaters can produce very hotwater. To reduce the risk of scald injury,it is mandatory under the requirementsof Australian Standard AS/NZS3500.4.2that a suitably approved temperaturecontrol device be fitted to the hot watersupply to outlets used primarily forpersonal hygiene. This valve should bechecked at regular intervals to ensure itsoperation and settings remain correct.