Dynex 16" LED TV 53DX-16E220NA16www.dynexproducts.comLabeling an input sourceYou can add a label to a video input source to make iteasier to identify. These labels are displayed on theINPUT SOURCE list and on the banner that appears whenyou press INFO.1 Press MENU.2 Press W or X to highlight Settings, then press T.3 Press S or T to highlight Input Label, then pressENTER.4 Press W or X to select a preset label from severaloptions, or select Custom to enter your own label.5 If you select Custom, press S or T to highlightCustom Label, then press X.6 Press S or T to select a character.7 Press X to move to the next position. Repeat thisstep to enter additional characters. You can enter asmany as 10 characters. If you need to delete acharacter, enter a blank space.8 When you complete the label, press MENU. The nexttime you press INPUT, the new label appears in theINPUT SOURCE list.9 Press EXIT to close the menu.Changing channel settingsAutomatically scanning for channelsWhen you scan for channels, your TV searches forchannels with signals and stores the channelinformation in the channel list. When you press CH+ orCH–, your TV goes to the next or previous channel in thechannel list.If the TV signal source changes, for example you changefrom an outdoor antenna to cable TV (no box), you needto scan for channels.1 Press MENU.2 Press W or X to highlight Channels, then press T orENTER.
