Dynex DX-26LD150A11 User Manual

Also see for DX-26LD150A11: Quick setup guide Quick setup guide User guide Quick setup guide User guide

Contents

14 Turning on your TV for the first timeDX-26LD150A11/DX-32LD150A11Connecting a home theater systemTo connect an audio receiver or Digital sound system:1 Make sure that your TV/DVD combo’s power cord is unpluggedand the audio device is turned off.2 Connect analog audio cables to the AUDIO L/R OUTPUT jacks onthe back of your TV/DVD combo, then plug the cables into theAudio In jacks of your audio receiver.-OR-Plug a digital coaxial cable into the COAXIAL DIGITAL OUTPUTjack on the back of your TV/DVD combo, then plug it into thedigital coaxial input jack on your Digital sound system or hometheater system.Note: The DIGITAL OUTPUT jack only works with digital sources.Connecting headphonesTo connect headphones:• Connect the headphones to the headphone jack on the side ofyour TV/DVD combo.Note: Loud noise can damage your hearing. When using headphones, usethe lowest volume setting that still lets you hear the sound.Turning on your TV for the firsttimeThe first time you turn on your TV, the Setup Wizard opens. The SetupWizard guides you through setting up basic settings including the menulanguage, time mode, picture mode, and TV signal source.To configure your TV:1 Make sure that you have inserted the batteries in the remotecontrol, connected your devices to the TV, and connected the ACpower.2 Press (Power), then wait several seconds. The initial SetupWizard opens (only the first time you turn on your TV) to theChoose your menu language screen.3 Press or to select English, Français, or Español, thenpress OK/ENTER to confirm. The Time screen opens with Modehighlighted.4 Press or to highlight an option, then press or toadjust the option. You can select:• Mode—You can select Auto or Custom time mode. If youselect Auto, the date and time are set based on a time signalreceived from a DTV channel. If you select Custom, you canadjust the date and time.• DST (Daylight Saving Time)—You can select On or Off.• Time Zone—You can select Pacific, Alaska, Hawaii,Atlantic, Eastern, Central, or Mountain.• Year—Press or to select the current year.• Month—Press or to select the current month.• Day—Press or to select the current day.• Time—When Time is highlighted, press or . Pressor to move the cursor from field to field, then press orto change the value in the field. Press TV MENU when thetime settings (hour and minute) are complete.Back of TV/DVDcomboDigital coaxial audio cableDigital sound systemAudio cableAudioreceiverBack of TV/DVDcomboSide of TV/DVDcomboPreviousMENUNextENTERSetup WizardMove SelectChoose your menu languageEspañolNextFrançaisEnglishSetup WizardTimeDST OffPacific198016YearMonthDayTimeTime ZoneAutoMode0 AM12 :PreviousMENUNextENTERMove Select