Dynex DX-26LD150A11 User Manual

Also see for DX-26LD150A11: Quick setup guide Quick setup guide User guide Quick setup guide User guide

Contents

Installing and removing the stand 5DX-26LD150A11/DX-32LD150A114 Slide the stand column into the slot in the bottom of the TV/DVDcombo.5 Secure the stand column to the TV/DVD combo with the eightscrews and washers provided.6 Secure the stand cover (included) to the TV/DVD combo with thetwo screws provided.7 Place your TV/DVD combo in an upright position on a flat surface.Removing the stand and stand column(DX-26LD150A11)If you want to wall-mount the TV/DVD combo, you will need to removethe stand as well as the stand column.To remove the stand and stand column (DX-26LD150A11):1 Lay your TV/DVD combo face down on a soft, dry, and lint freesurface.2 Remove the five screws securing the stand column to the TV/DVDcombo, then remove the stand and stand column.Removing the stand and stand column(DX-32LD150A11)If you want to wall-mount the TV/DVD combo, you will need to removethe stand as well as the stand column.To remove the stand and stand column (DX-32LD150A11):1 Lay your TV/DVD combo face down on a soft, dry, and lint freesurface.2 Remove the two screws securing the stand cover to the TV/DVDcombo, then remove the stand cover.SlotTVStandStand screws (M4*10) with washersScrews (M3*8)Stand screw holes(bottom view ofstand)Stand coverStand screws (M4*10) and washersNote: These screws can also beused to secure the wall-mountbracket to the TV/DVD combo.Screws (M3*8)Stand cover