Dynex DX-26LD150A11 User Manual

Also see for DX-26LD150A11: Quick setup guide Quick setup guide User guide Quick setup guide User guide

Contents

16 Understanding the basicsDX-26LD150A11/DX-32LD150A11Selecting a channelTo select a channel:• Press CH+ or CH- to go to the next or previous channel on thememorized channel list.• Press the number buttons to enter the analog or digital (main)channel number you want, then wait for the channel to change,or press OK/ENTER to change the channel immediately.• To select a digital sub-channel, press the number buttons toselect the main digital channel, then press the dot (.) buttonto select the sub-channel. Wait for the channel to change, orpress OK/ENTER to change the channel immediately.Note: Button presses must be within three seconds of each other.• Press RECALL to go to the last channel viewed.Adjusting the volumeTo adjust the volume:• Press VOL+ or VOL– to increase or decrease the volume.• Press MUTE to temporarily turn off all sound. Press MUTEagain to restore the sound.Displaying program informationTo display additional information:1 Press INFO to show an information banner. The informationbanner shows current program information such as channelnumber and resolution.• Digital mode information—Displays channel number,channel label (if preset), broadcast program name, TV rating,DTV signal strength, audio information, resolution, CC mode,current time, and current program start and end times.• Analog mode information—Displays channel number,channel label (if preset), audio information, and resolution.2 Press GUIDE to display program information in a window withlive program content for the channel you are watching. Pressor to view information about future programs on theselected channel. Press GUIDE or EXIT to exit this feature.On-screen menu overviewPicture menuAudio menuSetup menuChannel menuNotes:• Depending on the signal source selected, you may see differentoptions on your screen. The above menus are shown in TV mode.• Menu items that are not selectable are grayed out. Menus in thismanual are described in TV mode, unless otherwise indicated.• The illustrations and screens shown in the manual are forexplanation purposes and may vary from the actual screens on yourTV/DVD combo.Picture ModeContrastBrightnessColorTintSharpnessAdvanced VideoPicture Audio Setup Channel705060055Energy SavingMove Select ExitMENUSound ModeBassTrebleBalancePicture Audio Setup Channel505050StandardRAWtuptuOlatigiDAudio Language EnglishMove Select ExitMENUParental ControlsTimeClosed CaptionMenu SettingsVGA SettingsInput LabelRestore DefaultAudio OnlyPicture Audio Setup ChannelMove Select ExitMENUOffTV SourceAuto ScanFavoritesShow/HideChannel No.Channel LabelDTV Signal : GoodPicture Audio Setup ChannelAntenna8.1WFAA-DTMove Select ExitMENU