20 Dynex 32" LED TVDX-32D310NA15www.dynexproducts.comComponent video (better)1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.2 Connect a component video cable (not provided) to the VIDEO/Y, PB, and PR jacks on the back of your TV and to theCOMPONENT OUT jacks on the component video device.3 Connect an audio cable (not provided) to the AUDIO L and R jacks on the back of your TV and to the L/R AUDIO OUTjacks on the DVD or Blu-ray player.4 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.5 Press INPUT to open the INPUT SOURCE list.6 Press S or T to select COMP/AV, then press ENTER.NoteCables are often color-coded to match color-coded jacks.Notes• The VIDEO/Y, PB, and PR video jacks (used to connect acomponent device) share the AUDIO L and R jacks with theVIDEO/Y jack (used to connect a composite device).• When you connect the audio using the AUDIO L and R jacks,the audio output is analog.Back of TVAudio cableComponent videocableDVD or Blu-ray playerComponentvideo cableconnectorsAudio cableconnectorsComponentvideo jacksAnalogaudio jacksOn your TV
