8 Making connections2 Connect one end of a coaxial cable (not included) to the RF OUTjack on the antenna or on the cable or satellite TV box. If you areusing an antenna with twin-lead cable, you may need a300-75 ohm adapter (not provided) to connect it to the back ofyour TV. Likewise, if you are using several antennas, you mayneed a combiner (not provided).3 Connect the other end of the cable to the ANT/CABLE IN jack onthe back of your TV.Notes:Use a coaxial cable to eliminate interference and noise from radio waves.Do not bundle the coaxial cable with the power cord or other cables.If the antenna is not installed correctly, contact qualified service personnelto correct the problem.Connecting a VCRTo connect a VCR:1 Make sure that your TV’s power cord is unplugged and the VCR isturned off.2 Connect an AV cable to the AV VIDEO OUT jack on the VCR.3 Connect the other end of the cable to the Video1 or Video2 jackon the side of your TV.4 Connect an audio cable to the AV AUDIO OUT jacks on the VCR.5 Connect the other end of the cable to the Video1 or Video2audio in jacks on the side of your TV.To play from the VCR:1 Turn on your TV, then press INPUT. The INPUT SOURCE menuopens.2 Press or to select Video1 or Video2, then press ENTER.Note: You can also press VIDEO once for Video1 or twice for Video2.3 Turn on the VCR, insert a videotape, then press PLAY on the VCR.Home antennaterminal (75 ohm)ANT. jackTwin-lead flat cableRF coaxial cable (75 ohm)RF coaxial cable (75 ohm) RF coaxial cable (75 ohm)RF coaxial cable (75 ohm)Twin-lead flat cableCombiner (not provided)300-75 ohm Adapter(not provided)VHF antenna UHF antennaVHF, UHF, orcombinationantennaANT/CABLE INAntenna, cableTV, or satellite boxBack of TVSide of TVAV cableNote: Cables are oftencolor-coded to connectors.Connect yellow to yellow,red to red, and white towhite.DX-L321-10A_09-0407_MAN_ENG_V3.book Page 8 Wednesday, May 13, 2009 11:38 AM