Dynex DX-L321-10A User Manual

Also see for DX-L321-10A: Manual Quick setup guide Guía del usuario Guide de l'utilisateur

Dynex DX-L321-10A User Manual Manual pdf 19 page image

Adjusting the sound 15Press or to choose your preferred setting.• Cool–Pictures appear with a bluish tint.• Normal–Pictures appear more white.• Warm–Pictures appear more reddish.Freezing the pictureThere may be instances when you want to jot down informationdisplayed on the TV but you have no pen handy. In such cases, use theFREEZE button to capture the currently displayed image and view it in aseparate screen.To freeze the picture:1 Press FREEZE once to view an image capture of the display in aseparate screen while the programming continues to run.2 Press FREEZE again to display the image capture using the entirescreen.3 To continue with the regular programming, press FREEZE onemore time.Adjusting the soundAdjusting the soundTo adjust the sound:1 Press MENU on the remote control, or MENU on the controlpanel of your TV. The on-screen menu bar opens.2 Press or to highlight Audio, then press ENTER. The Audiomenu opens. The list of Audio submenus will vary depending onthe type of TV connection—analog or digital.3 Press or to highlight an option, then press ENTER to viewthe adjustment bar for that option or to change the setting. Pressor to make adjustments. Options include:• Bass–Adjusts the low sounds.• Treble–Adjusts the high sounds.• Balance–Adjusts the balance between the left and rightaudio channels.• Auto Volume–The TV speaker volume is set automatically.• TV Speaker–Turns the TV speaker on or off.• Audio Only–Turns off the video and lets you listen to thesound only.• MTS–Select the preferred audio stream for viewing analogTV programs.• Audio Language–Select the language track you prefer forviewing digital TV programs. Available options depend onyour digital TV provider.• Digital Audio–Select the preferred audio format for SPDIFaudio signals. SPDIF is only available on digital channels orwhen using an HDMI device.• Reset–Resets the audio settings to factory default.Changing channel settingsAutomatically scanning for channelsDepending on the type of TV service you’re using, you can scan foravailable channels in your area.Notes:• Make sure the antenna is properly connected to the TV before you start achannel scan.• If a system PIN has been set up, you will be prompted to key it in beforeyou can perform a channel scan.To auto scan for over-the-air and digital TV channels:1 Press MENU on the remote control, or MENU on the controlpanel of your TV. The on-screen menu bar opens.2 Press or to highlight Channels, then press ENTER. TheChannels menu opens.3 Press or to highlight Antenna Scan, then press ENTER.You will be prompted to confirm the channel scan.4 Select Yes, then press ENTER to confirm. Your TV automaticallyscans for available channels.To auto scan for cable TV channels:1 Press MENU on the remote control, or MENU on the controlpanel of your TV. The on-screen menu bar opens.Analog DigitalDX-L321-10A_09-0407_MAN_ENG_V3.book Page 15 Wednesday, May 13, 2009 11:38 AM