Dynex DX-L321-10A User Manual

Also see for DX-L321-10A: Manual Quick setup guide Guía del usuario Guide de l'utilisateur

Dynex DX-L321-10A User Manual Manual pdf 26 page image

22 Troubleshooting4 Press or to select the input source you want to assign a labelto, then press ENTER. The Custom Input Label screen for thatinput source opens.5 Press , , , or to select a label for the input source, thenpress ENTER to apply the new label.6 Repeated Steps 3–5 to apply labels to other input sources. Theselabels are displayed when you press INPUT or any of theindividual input source keys.Restoring default settingsCaution: When you restore default settings, all the settings (except thepassword and parental rating) you have customized are reset.To restore default settings:1 Press MENU on the remote control, or MENU on the controlpanel of your TV. The on-screen menu bar opens.2 Press or to highlight Settings, then press ENTER. TheSettings menu opens.3 Press or to highlight Reset All, then press ENTER. You areasked for your PIN.4 Enter your PIN number. A confirmation box opens.Note: If you have forgotten your PIN, the default number is 9999.5 Press or to select Yes, then press ENTER to load the defaultmenu settings.After the system reset the Welcome prompt appears. Perform achannel scan to reload the channels to your TV and then accessthe on-screen menus to reconfigure the TV settings.TroubleshootingWarning: Do not try to repair your TV yourself. Contact authorized servicepersonnel.Problem SolutionNo power • Make sure that the power indicator isilluminated blue.• Make sure that the power cord is securelyconnected to the AC-in jack and is pluggedinto a functional AC outlet. You may want toplug in another electrical device to thepower outlet to verify that it is supplyingthe proper voltage.Power is suddenlyturned offPress MENU and select Settings, Sleep Timerto make sure the Leave TV Off option isselected.Your PIN iscompromised 1. Press MENU and select Settings, Reset All,and then Yes.2. Access the on-screen menu again and selectLocks.3. Key in and reconfirm your new PIN.Remote controldoes not work • Replace the batteries. For moreinformation, see “Installing remote controlbatteries” on page 6.• Make sure that the batteries are insertedcorrectly. For more information, see“Installing remote control batteries” onpage 6.• Make sure that the power cord is pluggedinto an AC power outlet.The remote controlcode cannot bedetected by auniversal remote• Purchase a separate learning remotecontrol.• Go to www.dynexproducts.com for a list ofremote control codes.DX-L321-10A_09-0407_MAN_ENG_V3.book Page 22 Wednesday, May 13, 2009 11:38 AM