Dynex DX-LCD22-09 User Manual

Also see for DX-LCD22-09: Service manual Guía del usuario Guide de l'utilisateur

8 Setting up your TVSetting up your TVInstalling remote control batteriesTo install remote control batteries:1 Remove the battery compartment cover.2 Insert two AAA batteries into the battery compartment. Makesure that the + and – symbols on the batteries match the + and– symbols in the battery compartment.3 Replace the battery compartment cover.Notes:Make sure that you match the + and – symbols on the batteries with thesymbols in the battery compartment.Do not mix different types of batteries or old and new batteries.If you do not intend to use the remote control for an extended period oftime, remove the batteries to prevent leakage.Do not try to recharge non-rechargable batteries. They may overheat andrupture.Using the remote controlTo use the remote control:• Point the remote control directly at your TV, within a 60° anglehorizontally (30° to either side) and within 30° vertically of theremote control sensor on the front of your TV, and within 16 feet(about 5 m) of your TV.CautionDo not expose the remote control to liquids, direct sunlight, or shock.Do not mix batteries of different types.NotesObjects between the remote control and the remote control sensor mayblock the remote control signal.The range of the remote control may be diminished if direct sunlight orother strong light is shining on the remote control sensor. In this case,change the angle of the lighting, move your TV, or operate the remotecontrol closer to the remote control sensor.Connecting to AC powerNotes:The AC power cord has a grounding-type AC line plug. If the supplied ACcord does not match your AC power outlet, contact a qualifiedelectrician. Do not defeat the purpose of a grounded plug.To connect to AC power:1 Plug the AC cord into an AC power outlet.Warnings:Do not connect this TV to power using any device other than the suppliedAC power cord. This could cause fire, electrical shock, or damage.Do not use with a voltage other than the power voltage indicated on themarking label. This could cause fire, electrical shock, or damage.Do not plug or unplug the plug when your hands are wet. This may causeelectrical shock.Cautions:When this TV is not used for a long time, (such as away on a trip) in theinterest of safety, be sure to unplug it from the AC power outlet.If you need to replace the supplied AC power cord, contact customerservice.6 RECALL Press to return to the last TV channelviewed.7 VOL +/– Press to increase (+) or decrease (-)the volume.8 MUTE Press to mute the sound. Press againto restore the sound.9 GUIDE Press to display information about aDTV program (if available).10 ENTER Press to confirm option settings inthe on-screen menu.11 Press to navigate in the on-screenmenu.12 MENU Press to open the on-screen menus.13 SLEEP Press to set the sleep timer.14 MTS/SAP Press to select Stereo, SAP, or Monosound in analog TV mode. In DTVmode, press to select the audio track.15 CCD Press to turn closed captioning on oroff.16 CH-LIST Press to display the channel list.17 • Press to enter a program number formultiple program channels. Forexample 2•1 or 2•2.18 CH +/– Press to go to the next or previouschannel in the TV channel list.19 FAVORITE Press to display your favorite channellist.20 DISPLAY Press to display the informationbanner.21 EXIT Press to exit the menu.22 PICTURE Press to select the picture mode.23 AUDIO Press to select the preset soundmode. Options include News, Music,Movie, and Personal.# Button Description