59VERTICALThe program Vertical is used for vertical and/or flange mounted machines.Preparations1. Mount the M-unit on the movable machine and the S-unit on the stationarymachine.2. Select and to open Vertical program.3. Enter distances. Confirm each distance with .If you have a barcode reader, simply scan the barcode and all machine data is read.See “Measurement file handling” on page 11.Function buttonsLeave program.See “Control panel” on page 14.Select to enter diameter of coupling.Forward to measure view.1 Distance between S-unit and M-unit.Measure between the rods. Mandatory.2 Distance between S-unit and centre of coupling. Mandatory.3 Number of bolts (4, 6 or 8 bolts).4 Bolt circle diameter (centre of the bolts).5 Coupling diameter. Select to activate field.31 452www. .com information@itm.com1.800.561.8187
