Easy-Laser E540 Manual
                                                                                    | |
Contents
| 
65BTAEnter distances1. Connect to the Display unit via cable or use Battery pack with Bluetooth®.2. Press the ON button on the laser transmitter.3. Select to open the BTA program.4. Select if you want to enter sheave face width. Press OK.5. Enter distance between feet pairs. Press OK.Function buttonsLeave program.See “Control panel” on page 14.Sheave face width. Select to activate fields if the sheaves have differentface widths.Contains a sub menu.The Display unit automatically recognize where the units are placed.However, you can do this manually as well.Set M-unit to the left.Set M-unit to the right.Return to Automatic configuration.Sheave face widthThe distance from the belt to the axial face of the sheave can bedifferent on the two sheaves. To calculate a possible offset thesystem requires both sheave face widths.1. Measure the distance from the belt to the axial face of thesheave.2. Select to activate fields and enter distances.Sheave face widthOptionalDistancebetween feet pairsMandatoryMovable machine is to the left. Movable machine is to the right.www. .com information@itm.com1.800.561.8187 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine