Eaton 5PX Advanced User's Manual

Also see for 5PXEBM48RTG2: Advanced user's guide Service manual Advanced user's guide

614-40095-00 153.5 UPS connectionCheck that the indications on the name plate located on the back of the UPS correspond to the AC-power sourceand the true electrical consumption of the total load.1. Connect the UPS input cable (13) to the AC powersource.2. Connect the loads to the UPS. It is preferable toconnect the priority loads to the outlets marked (3) andthe non-priority loads to the outlets Group1, Group2 (4)that can be programmed.For the 5PX 2000 / 3000 models, connect any high-powerdevices or matching Power Distribution Unit (PDU) tothe L5-20R or L5-30R outlet.3. To program shutdown and startup of the Group1 andGroup2 outlets in order to extend battery runtime andperform scheduled shutdowns, please see the "In/Outsettings" section.3.6 Connection with a FlexPDU (Power Distribution Unit) optional module1. Connect the UPS power cord (13) to the AC powersource.2. Connect the input cord of the FlexPDU module (24) toone of the UPS outlets (3).3. Connect the equipment to the outlets (41) on theFlexPDU module. These outlets differ, depending on theversion of the FlexPDU module.3.7 Connection with a HotSwap MBP (Maintenance ByPass) optional moduleThe HotSwap MBP module makes it possible to service or even replace the UPS without affecting the connected loads(HotSwap function).