26Table 4-3 BuzzerPriority UPS condition Buzzer1 UPS fault and failure Continuous2 Normal mode No beep3 Battery/battery test mode One beep per 4 sec(One beep per 1s when battery low)4 Bypass mode One beep per 2 minutes5 Overload One beep per 500ms6 Other alarm One beep per 1s7 Manual bypass One beep per 1sNote: buzzer alarm can be enable/disable by function button, if buzzeralarm is disabled, all present alarm is muted except that the button pressstill has a tick beep. Buzzer alarm will be enabled automatically once newalarm arises.InterfaceIn order to make sure all segments are OK, LCD begins to do self-test afterpower on. During self-test, all the segments will be lighted for 2 seconds,then the LCD will turn to normal display status.Fig. 4-2 The default LCD display

Eaton 9E 10000i Manual

InTroduCTIon

UPS Standard Features

Tie Cabinet

Conventions Used in This Manual

Getting Help

SafeTy WarnIngS

uPS InSTallaTIon Plan and unPaCkIng

ups installation plan and unpacking

UPS System Power Wiring Preparation

Maintenance Bypass

UPS System Interface Wiring Preparation

Inspecting and Unpacking the UPS Cabinets

uPS SySTem InSTallaTIon

External Power Wiring Installation

Installing Interface Connections

Installing Parallel Pull Chain and CAN Control Wiring and Connections

Installing Mini-Slot Interface Connections

Installing a REPO Switch

Initial Startup

underSTandIng uPS oPeraTIon

Single UPS

High-Efficiency Mode

Bypass Mode

Battery Mode

Single UPS Unit System Oneline Configurations

understanding ups operation

uPS oPeraTIng InSTruCTIonS

Control Panel

Using the Control Panel

System Events

Using the LCD and Pushbuttons

Using the Menu

Display Menu Operation

System Controls

Single UPS Operation

Transfer from Normal to Bypass Mode

Transfer from Bypass to Normal Mode

Transfer from Internal Maintenance Bypass to Normal Mode (Optional on 80-120kVA)

Charger Control

Using the Remote Emergency Power-off Switch

Multiple UPS Parallel Operation

Starting the Parallel UPS in Bypass Mode

Single UPS Shutdown

Single UPS Restart

Battery Test

Using the UPS LOAD OFF Command

ups operating instructions

uPS maInTenanCe

Performing Preventative Maintenance

ANNUAL Maintenance

Installing Batteries

ProduCT SPeCIfICaTIonS

UPS Output

list of figures

list of tables

INTRODUCTION

Integrated Transformer Cabinet

Basic System Configurations

Symbols, Controls, and Indicators

SAFETY WARNINGS

UPS INSTALLATION PLAN AND UNPACKING

Battery Type

UPS SYSTEM INSTALLATION

Installing Power Terminal Cover Base

External Battery Cabinet Installation

Integrated Accessory Cabinet-Bypass Installation

Connecting Internal Battery Strings

installation checklist

UNDERSTANDING UPS OPERATION

UPS OPERATING INSTRUCTIONS

load off

Starting the UPS in Bypass Mode

Transfer from Standard Normal Mode to HE Normal mode

UPS and Critical Load Shutdown

UPS MAINTENANCE

Performing Preventive Maintenance

PERIODIC Maintenance

PRODUCT SPECIFICATIONS

Options and Accessories

Reduced Battery String Model

Using This Manual

For More Information

Sidecar Integrated Accessory Cabinet-Bypass

Installing Interface Wiring and Connections

Installing Mini-Slot Interface Wiring and Connections

Modes

UPS Internal Battery Plus External Battery Cabinet Runtimes (in Minutes) at Full load