Eaton ATC-300 O & M Manual

Also see for Cutler-Hammer ATC-300: Instruction booklet Operation and maintenance manual Instruction booklet Instruction booklet O & M Manual

For more information visit: www.eaton.com IB01602015EInstruction BookletPage 28 Effective: August 2010 ATC-300 2-Position ContactorBased Transfer SwitchFigure 23. ATC-300 Logic (Utility Supplying Load).Step 6: To view the setpoints, press the pushbut-ton and enter the Password.Note: The factory default Password is 0300. Once all installation andtesting is complete, the Password should be changed by authorizedpersonnel to a unique Password for the equipment.After entering the password, press the pushbutton until the VIEW SETPOINTS menu appears.Select YES. Press the pushbutton toscroll through the setpoints (Figures 24 through 26 andTable 6).ATC-300seseSource 1Source 2AvailableAvailableConnectedConnectedLoadUnit StatusAlarmResetEngineTest LampTestHelp StepEnterBypassTDNE / TDEN