Eaton Bussmann Series Installation Manual

Also see for Bussmann Series: Installation manual Installation manual Instruction sheet Installation manual Installation manual

Eaton Bussmann Series Installation Manual Manual pdf 1 page image

Installation manual 3A3695 Effective April 2018Supersedes February 2018CCP2-H4X-_ selector and pistol handlesfor use with 8 mm shaftsThese instructions cover the installationprocedures specific to the catalog numbers shownabove. Please review the switch and switchhandle applications table on page 2 to ensure thehandle in this kit can be installed on your specificCompact Circuit Protector (CCP) switch.Clockwise pistol handle:• CCP2-H4X-B2• CCP2-H4X-R2Counterclockwise pistol handle:• CCP2-H4X-B2L• CCP2-H4X-R2LCounterclockwise selector handle:• CCP2-H4X-B1L• CCP2-H4X-R1LClockwise selector handle:• CCP2-H4X-B1• CCP2-H4X-R1For complete installation, customers must supplyone of the following 8 mm square shafts (catalognumbers):• CCP2-SH1-290 (11.5”/290 mm)• CCP2-SH1-490 (19.3”/490 mm)For left side operation only For front and right side operation only