Eaton COOPER POWER Series Installation Instructions Manual

Also see for COOPER POWER SERIES: Installation and operation instructions Installation instructions Installation instructions Installation and operation instructions Operation instructions

Contents

Eaton COOPER POWER Series Installation Instructions Manual Manual pdf 16 page image

12Edison m o d u l a r f u s e ( E M F ) installation instru c t ionsINSTALLATION INSTRUCTIONS MN132031EN November 2016EMF Fuse replacement! WARNINGHigh Voltage All associated apparatus must bede-energized prior to any hands-on installation ormaintenance of this equipment Failure to do so couldresult in contact with high voltage, which will causedeath or severe personal injuryWhen the Edison Modular Fuse operates, it can be replacedwithout removing the entire mounting assembly. Follow theappropriate steps when removing the fuse and re-fusing.1. De-energize the system using the approvedsafety procedures.2. Place the elbows in the pockets using the approvedsafety procedures.! CAUTIONPersonal Injury The fuse is not secure when the clampsare released Support the fuse during the replacementprocedure Failure to do so may result in personal injury3. Remove the old fuse.For the quick-release clamps, remove the cotterpin, release buckle, and remove the fuse. Refer toFigure 35.For the bolted clamps, loosen and remove the bolt andremove the fuse. Refer to Figure 36.4. Replace with a new EMF fuse and secure per theinstallation instructions.Figure 35 Closed quick-release clampFigure 36 Bolted clamp strapsBolt