Eaton Crouse-Hinds Series Installation & Maintenance Information

Also see for Crouse-hinds series: Operating instructions Instruction manual Operating instructions Operating instructions Instruction manual

Eaton Crouse-Hinds Series Installation & Maintenance Information Manual pdf 1 page image

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCEIF 1858FMVA/PFMA LED floodlight safety cable(Part number: SC831)Installation & maintenance informationSAFETY CABLE INSTALLATION INSTRUCTIONS –20L/25L1. Remove power from floodlight.2. Select a mounting location directly above luminaire’s center of gravity(centerline of fixture).3. Install appropriate corrosion-resistant hardware into wall or surface tointerface with safety cable. Weight of floodlight is 45 lbs.4. Ensure that safety cable is taut, and there is no slack in the cable afterinstallation. Wrap safety cable around yoke.5. Install safety cable loop in carabiner.6. Attach carabiner to mounting hardware, and ensure that carabinergate is installed fully on threads.• Safety cable accessory part number: SC831SAFETY CABLE ROUTING – 40L/50L1. Remove power from floodlight.2. Select a mounting location directly above luminaire center of gravity(centerline of fixture).3. Use two (2) safety cables, one around each side bracket, wheninstalling for use with floodlight.4. Install appropriate corrosion-resistant hardware into wall or surface tointerface with safety cable. Weight of floodlight is 81 lbs.5. Wrap one (1) safety cable around each side bracket. Ensure thatsafety cable is taut, and there is no slack in the cable after installation.6. Install safety cable loop in carabiner.7. Attach carabiner to mounting hardware, and ensure that carabinergate is installed fully on threads.• Safety cable accessory part number: SC831Eaton’s Crouse-Hinds Division IF 18581201 Wolf Street, Syracuse, New York 13208 • U.S.A. Revision 1Copyright © 2018 New 09/18All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness thereof are not guaranteed. Inaccordance with Eaton’s Crouse-Hinds Division’s “Terms and Conditions of Sale,” and since conditions of use are outside our control, the purchaser should determine the suitability of the product for his intendeduse and assumes all risk and liability whatsoever in connection therewith.

/ 4

Related manuals for Eaton Crouse-hinds series