18INM MTL RugiCAM-IP rev 35 5 4 Area MaskThere are two ways to select the area mask. Quick select and Value input selectUp to 4 area masks can be set on the video.• Quick select:1 Click “Enable” check box and click “Edit” on the right.2 Drag mouse on the video to select the area mask.3 Click “Apply”.• Value input select:1 Click “Enable” check box.2 Input the values of X, Y, Width and Height, then click “Edit”.3 Click “Apply”.• Clean area mask:1 Click “Edit” of the area mask you want to remove.2 Click “Reset”.3 Click “Apply”.5 5 5 Analog VideoNot applicable5 5 6 Encoding ParameterSelect a Profile, click check box to select and save the selected profile.• BaseLine Profile• Main Profile• High Profile
