Eaton Crouse-Hinds Series Instruction Manual

Also see for Crouse-hinds series: Operating instructions Instruction manual Operating instructions Operating instructions Instruction manual

Eaton Crouse-Hinds Series Instruction Manual Manual pdf 44 page image

40INM MTL RugiCAM-IP rev 313 APPENDIX B -How to use WIFI1. For the first time you use the WIFI function, you need to enter IE interface withnetwork cable and go to Network Setting⇔ WIFI Access to enable the WIFI. Thenselect the WIFI ID and enter password.Click Save, the camera will reboot.2. After the camera boots up, you can get the IP address from the serial log screen(the WIFI IP address is behind the IP address from network cable) or theUPnP device.NOTEPlease make sure the camera module and your PC (which access the camera viaWIFI) are in the same network (wifi router)3. You can also set the static IP of WIFI.Go to WIFI Settings.Select Static IP, enter the static IP address and click submit.The IP camera will reboot in next step. After the camera boots up, the static IPaddress can be used to open the IE interface.Select IP Address, enter the IP address, and click save.The IP camera will reboot . After the camera boots up, the static IP address can beused to open the IE interface.