Eaton Crouse-Hinds Series Operating Instructions Manual

Also see for Crouse-hinds series: Operating instructions Instruction manual Operating instructions Operating instructions Instruction manual

Contents

Eaton Crouse-Hinds Series Operating Instructions Manual Manual pdf 13 page image

13ATEX type examination certificate:Marking acc. to 2014/34/EU and standard:EN 60079-0IECEx type examination certificate:Category of application: IEC60079-0(A)The EC-Type Examination Certificate and any future supplements thereto shall, at the same time, be regarded as supplements tothe EC-Type Examination Certificates PTB 99 ATEX 3128 X and PTB 99 ATEX 3101 XPerm. storage temperature in original packing: toDegree of protection to IEC/EN 60529: *) (when fully assembled)*) M40, M50 und M63 with suitable flange seal1 Technical data1.1 Technical details for:Cable entries (KLE) M12x1,5 to M63x1,5Type SW L1 L2 E weightapp.Dimension drawings and dimensions in mmTypeoperatingtempera-tureimpactresistance Cable diameterScrew-inthread inenclosureColour ofdustprotectioncoverSeal 1+2+3 1 2 3 Seal 1+2 1 2 3 Seal 1 1 2 3min. max. min. max. min. max.°C Joule Ø Nm** Ø(1)(2) Nm** Ø Nm** Ø(1)(2) Nm** Ø Nm** Ø(2) Nm** Nm**whitewhitewhitegreenwhitegreenwhitegreengreengreengreenadditional seal** Test torques at 20°C(1) The tests of clamping ranges and torque values were performed with metal mandrel. The clamping range can vary by using cables with different manufacturing tolerancesand material properties. Please use the combination of sealing 1 + 2 + 3 for the intermediate region.(2) When selecting the seal rubber, ensure that the cap nut can be tightened when carrying out any future maintenance work on the cable entry.1 2 3 11 2 3 1+2+31+211 2 3 1+2+31+21Fig. D Cable diameter 16 mme.g. for M25x1,5Fig. C Cable diameter 12 mme.g. for M25x1,5seal 2seal 1Ø 9 mmuse seal 1 + 2 + 3.Fig. B Cable diameter 9 mme.g. for M25x1,5seal 3 seal 2seal 1 seal 3Ø 12 mmUse seal 1 + 2.Remove seal 3.Ø 16 mmUse seal 1.Remove seal 2 + 3.seal 2seal 1 seal 3GBCable entries, blanking plugs, screw plugs, trumpet-shaped cable glands, reducing glands and drain plugsPressure screw Intermediate glandFig. A>5 mm0 mmM12, M16 (Ø < 9 mm), M20 ... M63M16 (Ø > 9 mm)ØØPTB 14 ATEX 1015 X(A)II 2 G Ex e IIC GbII 2 D Ex tb IIIC DbIECEx PTB 14.0027X(A)Ex e IIC GbEx tb IIIC Db-20° C +70° CIP 66M12x1,5 15 mm 19,3 mm 12 / 8 mm 16,2 mm 3,4 gM16x1,5 20 mm 23,0 mm 12 / 8 mm 22,0 mm 6,5 gM20x1,5 24 mm 25,0 mm 13 / 8 mm 26,5 mm 10,1 gM25x1,5 29 mm 29,5 mm 13 / 8 mm 32,0 mm 16,9 gM32x1,5 36 mm 35,5 mm 15 / 10 mm 40,0 mm 27,6 gM40x1,5 46 mm 39,5 mm 15 / 10 mm 50,5 mm 50,3 gM50x1,5 55 mm 44,0 mm 16 / 12 mm 60,0 mm 75,9 gM63x1,5 68 mm 47,0 mm 16 / 12 mm 75,0 mm 117,6 gM12x1,5 -20 - 70 4 5,0 0,8 7,0 1,0 1,2M16x1,5 -20 - 70 4 5,5 1,0 7,0 1,0 7,0 1,0 10,0 1,4 3,3M20x1,5 -20 - 70 7 5,5 1,5 7,0 1,0 7,0 1,5 9,0 1,4 9,5 1,0 13,0 1,7 2,7M20x1,5 -40 - 70 4 5,5 1,5 7,0 1,0 7,0 1,5 9,0 1,4 9,5 1,0 11,0 1,7 2,7M25x1,5 -20 - 70 7 8,0 1,5 10,0 2,0 10,0 2,3 13,0 2,6 13,5 1,3 17,5 2,3 3,0M25x1,5 -55 - 70 7 8,0 1,5 10,0 2,0 10,0 2,3 13,0 2,6 13,5 1,5 15,0 2,3 3,0M32x1,5 -20 - 70 7 14,0 3,0 17,0 4,0 17,5 1,5 21,0 1,3 5,0M32x1,5 -55 - 70 7 14,0 3,0 17,0 4,0 17,5 1,5 21,0 1,3 5,0M40x1,5 -55 - 70 7 19,0 3,3 22,0 5,5 22,0 3,3 28,0 6,7 7,5M50x1,5 -55 - 70 7 24,0 6,0 28,0 7,0 28,0 5,0 35,0 7,0 7,5M63x1,5 -55 - 70 7 29,0 12,0 35,0 12,0 36,0 12,0 41,0 13,0 7,541,0 13,0 48,0 7,8