After crimping, measure the crimp diameter across each of the flatsof the crimped fitting. Press the Calculator Icon .The calculator window will open. Enter the four measurements andselect the Calculate button. One or more values must be entered for thecalculation to be performed. The offset value is automatically calculatedbased on the average of the measurements entered and stored with theFavorites record, if the spec was accessed from Favorites.Note: The calculated offset may be adjusted and overwritten byselecting the Offset button and entering a new value.Changing crimp offsets via calculatorA. Enter the 4 Measured Diameters inMeasured “A”, “B”, “C”, and “D”B. Press “Calculate”A. Press CalculatorCC

Eaton FT1380e Operator's Manual