Eaton Lumark Crosstour LED Knuckle Kit Installation Instructions Manual

INS #Brand Logoreversed out ofblackINS #IB506005ENInstallation Instructions - Crosstour LED Knuckle KitInstructions d’installation - Charnière Crosstour DELInstrucciones de instalación - Kit De Codo LED CrosstourIMPORTANT: Read before installing fixture. Retain for future reference.SAFETY: This fixture must be wired in accordance with the National Electrical Code and applicable local codes andordinances. Proper grounding is required to insure personal safety. Carefully observe grounding procedure underinstallation section.WARNINGMake certain power is OFF before starting installationor attempting any maintenance. Risk of fire/electricshock. If not qualified, consult an electrician.WARNINGRISK OF ELECTRIC SHOCK—Disconnect power at fuseor circuit breaker before installing or servicing.WARNINGRISK OF BURN—Disconnect power and allow fixtureto cool before servicing.WARNINGRISK OF PERSONAL INJURY—Fixture may becomedamaged and/or unstable if not installed properly.WARNINGDO NOT mount luminaire within 6” of a combustiblesurface. DO NOT handle luminaire by the glass.WARNINGMake certain power is OFF before starting installationor attempting any maintenance.ote:N These instructions do not claim to cover alldetails or variations in the equipment, procedure,or process described, nor to provide directionsfor meeting every possible contingency duringinstallation, operation or maintenance. Whenadditional information is desired to satisfy aproblem not covered sufficiently for user’s purpose,please contact your nearest representative.ote:N Specifications and dimensions subject to changewithout notice.