Eaton Metalux OHB Series Installation Instructions Manual

INS #Brand Logoreversed out ofblackINS #IB507014ENInstallation Instructions – OHB Y-Toggle and V-HangerInstructions d’installation – OHB Y-Toggle et V-HangerInstrucciones de instalación – OHB Y-Toggle y V-HangerRisk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of thisproduct must be performed by a qualified electrician. This product must be installed in accordancewith the applicable installation code by a person familiar with the construction and operation ofthe product and hazards involved.Risk of Fire and Electric Shock- Make certain power is OFF before starting installation orattempting any maintenance. Disconnect power at fuse or circuit breaker.Risk of Fire- Minimum 90°C supply conductors.Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.Risk of Personal Injury- Due to sharp edges, handle with care.Failure to comply with these instructions may result in death, serious bodily injury and propertydamage.WARNINGDISCLAIMER OF LIABILITY: Eaton assumes no liability for damages or losses of any kind that may arise from theimproper, careless, or negligent installation, handling or use of this product.IMPORTANT: Read carefully before installing fixture. Retain for future reference.NOTICE: Green ground screw provided in proper location. Do not relocate.NOTICE: Fixture may become damaged and/or unstable if not installed properly.ote:N Specifications and dimensions subject to change without notice.ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage ondelivery receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must befiled within 15 days of delivery. All damaged material, complete with original packing must be retained.Metalux