INS #Brand Logoreversed out ofblackINS #IB519090ENInstallation Instructions – VT4S LED Vaportite Luminaire InstallationInstructions d’installation – Luminaire DEL étanche à la vapeur VT4SInstrucciones de instalación – Instalación de la luminaria VT4S LEDIMPORTANT: Read carefully before installing fixture. Retain for future reference.WARNINGRisk of Fire, Electrical shock, Cuts and or otherCasualty Hazards. This product must be installed inaccordance with the applicable installation code bya qualified electrician or a person familiar with theconstruction and operation of the product and thehazards involved. Eaton assumes no responsibilityfor claims brought about by improper or carelessinstallation or handling of this product.WARNINGRisk of Fire and Electric Shock. If not qualified, consultan electrician.CAUTIONEdges May Cut. Handle with care.CAUTIONRisk of Burn. Disconnect power and allow fixture to coolbefore handling fixture.oticee:N Minimum 90° supply conductors.oticee:N Green ground screw provided in proper location.Do not relocate.otee:N Specifications and dimensions subject to changewithout notice.ATTENTION Receiving Department:Note actual fixture description of any shortage or noticeable damage on delivery receipt. File claim for common carrier(LTL) directly with carrier. Claims for concealed damage must be filed within 15 days of delivery. All damaged material,complete with original packing must be retained.VT4S DescriptionThe VT4S LED is a Vaportite fixture using a reinforced fiberglass housing with a high impact diffuser. The fixture issuitable for interior and exterior applications and can be surface, pendent or chain mounted. The VT4S LED has beendesigned for maximum operation in commercial institutional and industrial environments and is suited for ambienttemperatures ranging from -40°C to 40°C. It is also rated for wet locations and has IP ratings of IP65, IP66, IP67, andIP69.Metalux