INS #Brand Logoreversed out ofblackINS #IB519084ENInstallation Instructions – VT3 LED Vaportight Luminaire InstallationInstructions d’installation – Luminaire DEL étanche à la vapeur VT3Instrucciones de instalación – Instalación de la luminaria VT3 LEDVaportightIMPORTANT: Read carefully before installing fixture. Retain for future reference.WARNINGRisk of Fire, Electrical shock, Cuts and or otherCasualty Hazards. This product must be installed inaccordance with the applicable installation code bya qualified electrician or a person familiar with theconstruction and operation of the product and thehazards involved. Eaton assumes no responsibilityfor claims brought about by improper or carelessinstallation or handling of this product.WARNINGRisk of Fire and Electric Shock. If not qualified, consultan electrician.CAUTIONEdges May Cut. Handle with care.CAUTIONRisk of Burn. Disconnect power and allow fixture to coolbefore handling fixture.otice:N Minimum 90° supply conductors.otice:N Green ground screw provided in proper location.Do not relocate.ote:N Specifications and dimensions subject to changewithout notice.ATTENTION Receiving Department:Note actual fixture description of any shortage or noticeable damage on delivery receipt. File claim for common carrier(LTL) directly with carrier. Claims for concealed damage must be filed within 15 days of delivery. All damaged material,complete with original packing must be retained.VT3 DescriptionThe VT3 LED is a Vaportite fixture using a reinforced fiberglass housing with a high impact diffuser. The fixture is suitablefor interior and exterior applications and can be surface or chain mounted. The VT3 LED has been designed for maximumoperation in commercial institutional and industrial environments and is suited for ambient temperatures of -20°C to25°C, with some models rated to 55C. It is also rated for wet locations and has IP ratings of IP65, IP66, IP67, and IP69.