Eaton Powerware 3105 UPS User Manual

Also see for Powerware 3105 UPS: Reference guide User manual User manual User manual

Contents

UserÊs Manual 350-700VA Rev B 7Indicators1. On/Off Push Button/Test SwitchOne switch controls the power to your equipment. Upon power turn on, unitperforms a self-test to detect overload or undercharged conditions.Turn on the UPSPress and hold the push button switch depressed for more than one second.Release the switch after the audible beep is sounded.Turn off the UPSPress and hold the push button switch for more than one second and release theswitch after the audible beep is sounded. The UPS will shut down.Self-TestThe UPS performs a self-test for about 3 seconds when the UPS is turned on.2. On/Off Battery LEDIndicates the UPS is on and is powering your equipment.A constantly illuminated LED indicates normal utility power operation.A blinking LED indicates that the UPS is providing power from its battery.3. Fault/Warning LEDIndicates a fault or warning condition is present.A constantly illuminated LED indicates a LOW battery condition.A blinking LED indicates the UPS is overloaded.4. Battery Backup & Surge Protection Outlets(3) Australian 10 Amp output receptacles that provide both battery backup and surgeprotection.5. Surge Protection Outlets3) Australian 10 Amp output receptacles that provide surge and spike protection.21 3 45