Eaton Powerware 3105 UPS User Manual

Also see for Powerware 3105 UPS: Reference guide User manual User manual User manual

Contents

UserÊs Manual 350-700VA Rev B86. RJ11 Phone/Fax Protection Connectors7. USB Communication PortThe provided LanSafe monitoring and shutdown software can be automaticallyconfigured to save your files and shut down your computer in the event of aprolonged power outage.Your personal computer can receive the status as utility power line, utility powerfailure, on battery and low battery by contact closure signals that are sent throughthe USB port.8. Circuit Breaker (resetable)The button protrudes out when an overload condition occurs. If the button protrudesout, then disconnect some non-essential equipment and reset the circuit breaker bypushing the button inward.9. Power connector10 Amp IEC to 10 Amp Australian input lead provided.Battery Replacement procedure:1. Batteries must be replaced with identical type.2. Disconnect UPS system from power source3. Open battery door.4. Disconnect used battery. Connect new battery. (It is important that connectors befirmly attached to new batteries.5. Close battery door.6. Properly recycle used battery.350VA and 500VA models (12V-4.5Ah,or 5Ah battery)6789