Eaton Powerware 9125 User Manual

Also see for Powerware 9125: Reference guide User guide User guide User guide Installation guide

EATON Powerware® 9125 Two-in-One UPS (700–2000 VA) User’s Guide S 164201514 Rev B www.powerware.com 41Chapter 6 Additional UPS FeaturesThis section describes:S X-Slot cardsS Network transient protectorS Load segmentsX-Slot CardsX-Slot cards allow the UPS to communicate in a variety of networkingenvironments and with different types of devices. The Powerware 9125is factory-installed with a Single-Port Card or USB Card, depending onthe customer order.S ConnectUPS -X Web/SNMP Card - has SNMP and HTTP capabilitiesas well as monitoring through a Web browser interface; connects to atwisted-pair Ethernet (10/100BaseT) network. It has a built-inswitching hub that allows three additional network devices to beconnected to the network without the requirement of additionalnetwork drops. In addition, a Powerware Environmental MonitoringProbe can be attached to obtain humidity, temperature, smoke alarm,and security information.S Relay Interface Card - has isolated dry contact (Form-C) relay outputsfor UPS status: Utility failure, Low battery, UPS alarm/OK, or Onbypass.S Modbus® Card - allows you to continuously and reliably monitor theUPSs in your Building Management System (BMS).S Multi-Server Card - has six serial communication ports that cancommunicate simultaneously with other computers using PowerwareLanSafe® Power Management Software (provided on the SoftwareSuite CD).S Single-Port Card - connects to the Powerware Expansion Chassis toenable multiple communication options or to a PC for powermanagement control.S USB Card - connects to a USB port on your computer.t