Eaton Powerware 9305 UPS Quick Start Instructions

...............Checklist1. Verify that all of the following items are available:J ConnectUPS Web/SNMP Adapter package contents (seefront cover)J Phillips screwdriverJ MicrosoftR WindowsR operating system (for other operatingsystems, see the help file on the Software Suite CD)J Available serial port (RS-232)J HyperTerminalR (ships with Windows) or equivalentterminal emulation applicationJ Internet Explorer Web browser2. Contact your local network administrator for the followingmandatory network settings:J IP Address (static address*)J Gateway IP AddressJ Network Mask IP Address* If you are setting up the ConnectUPS Adapter in a DHCPenvironment, the network administrator must set up the DHCPserver to provide a static address each time the adapter makesa DHCP request. Provide the network administrator with theadapter’s MAC address (on the bottom of the adapter):J MAC address3. If you need e-mail functionality, obtain the following networksettings (either SMTP only or DNS and Host Name):J SMTP (mail server) IP AddressJ DNS (name server) IP AddressJ Host NameRefer to the ConnectUPS Web/SNMP Card User’s GuidePDF on the Software Suite CD for detailed setup information.4. List the applicable UPS load segment (receptacle group)connections (refer to the UPS user’s guide to see if loadsegments are available for your UPS):J Load Segment 1 is connected toJ Load Segment 2 is connected toJ Load Segment 3 is connected toExamples of load segment equipment connections are“CPU MX1,” “Monitor MX1,” and “Router San Diego 1.”