IMPORTANT SAFETY INSTRUCTIONSSAVE THESE INSTRUCTIONSThis manual contains important instructions that you should follow during installation and maintenance of the UPS and batteries.Please read all instructions before operating the equipment and save this manual for future reference.CONSIGNES DE SÉCURITÉ IMPORTANTESCONSERVER CES INSTRUCTIONSCe manuel comporte des instructions importantes que vous êtes invité à suivre lors de toute procédure d'installation et de maintenancedes batteries et de l'onduleur. Veuillez consulter entièrement ces instructions avant de faire fonctionner l'équipement et conserver cemanuel afin de pouvoir vous y reporter ultérieurement.Class A EMC StatementsFCC Part 15NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference inwhich case the user will be required to correct the interference at his own expense.W A R N I N GThis is a product for restricted sales distribution to informed partners. Installation restrictions or additional measures may be needed toprevent electromagnetic disturbances.Eaton, Powerware, ABM, LanSafe, Power Xpert, Powerware Hot Sync, and X-Slot,are registered trademarks and ConnectUPS is a trademark ofEaton Corporation or its subsidiaries and affiliates. IBM and AS/400 are registered trademarks of International Business Machines Corp. Modbus isa registered trademark of Schneider Electric. National Electrical Code and NEC are registered trademarks of National Fire Protection Association,Inc. All other trademarks are property of their respective companies.Copyright 2004-2009 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may be reproduced in any way withoutthe express written approval of Eaton Corporation.
