UPS OPERATING INSTRUCTIONSEaton 9395 Plus 1 UPS (225–275 kVA) Installation and Operation Manual 164201710 Rev 2 www.eaton.com\powerquality 7-57.2.4 Using the MenuThe UPS menu bar allows you to display data in the information area to help youmonitor and control UPS operation. Table 7‐2 shows the basic menu structure.Table 7‐2. Display Function Menu MapMenu Option DescriptionEVENTS Displays the list of Active System Events and a historical log of system events.METERS Displays performance meters for the system or critical load.CONTROLS Displays the System Status screen.SETUP Allows you to set the display contrast, set the date and time for the time stamp,configure the UPS serial communication ports, and view the firmware version numbers.LOAD OFF De-energizes the critical load and powers down the UPS.ESC Returns to Main Menu and Mimic screen from the Events, Meters, Controls, or Setupscreens. Returns to the main System Setup Level screen from a setup submenu.Return arrow acknowledges or executes a command, or saves a setting.Up and down arrows scroll through screens and lists or highlight settings.Left and right arrows select or adjust settings displayed on the screen.7.2.5 Mimic ScreenFigure 7‐4 shows the Main Menu and Mimic screen. To select the Mimic screen fromthe Events, Meters, Controls, or Setup screens, press the ESC pushbutton on thecurrent menu bar.The Mimic screen shows the internal components of the UPS cabinet and a real‐timegraphical representation of the operating status of the system.TIME: 11 : 35 : 43 DATE: 12 / 11 / 2008CONTROLSLOAD OFFMETERSEVENTS SETUPOUTPUTBATTUPSINPUTSTSWBYPASSFigure 7‐4. Main Menu and Mimic Screen (Online Mode)
