Eaton Powerware Environmental Rack Monitor User Manual

CONFIGURATIONEATON Powerware® Environmental Rack Monitor (ERM) User’s Guide S 164201673 Rev 120+============================================================================+| IP Address Community String Access |+============================================================================+[1] 0.0.0.0 * NotAccess[2] 0.0.0.0 * NotAccess[3] 0.0.0.0 * NotAccess[4] 0.0.0.0 * NotAccess[5] 0.0.0.0 * NotAccess[6] 0.0.0.0 * NotAccess[7] 0.0.0.0 * NotAccess[8] 0.0.0.0 * NotAccessCOMMANDS -1. Modify - Modify an entry of table2. Reset - Reset an entry to default from table0. Return to previous menuPlease Enter Your Choice => _Figure 17. Access Control TableSet Trap ReceiversIf you want to use a PC and perform the SNMP manager ‘trap’ functionin order to manage the TH-Module through the ERM, the IP address ofthe PC must be added to the ERM list.1. Type 4 on the Main Menu to display the Trap Receiver Table screen(see Figure 17).2. Type 1 on the Trap Receiver Table screen to modify an entry in theAccess Control Table.3. Type 2 on the Trap Receiver Table screen to reset an entry to thedefault setting.4. Type 0 to return to the Main Menu.NOTE The Set Trap Receivers configuration is used only for SNMP Network Manager.