Eaton Powerware Environmental Rack Monitor User Manual

CONFIGURATIONEATON Powerware® Environmental Rack Monitor (ERM) User’s Guide S 164201673 Rev 1 21+============================================================================+| IP Address Community String Severity Description |+============================================================================+[1] 192.168.65.235 * Informational[2] 192.168.61.168 * Informational[3] 0.0.0.0 * Informational[4] 0.0.0.0 * Informational[5] 0.0.0.0 * Informational[6] 0.0.0.0 * Informational[7] 0.0.0.0 * Informational[8] 0.0.0.0 * Informational1. Modify - Modify an entry of table2. Reset - Reset an entry to default from table0. Return to previous menuPlease Enter Your Choice => _Figure 18. Trap Receiver TableComplete ERM ConfigurationAfter configuration is complete, press “0” to exit the consoleconnection. It is not necessary to reboot the ERM.If you wish to reboot the ERM, type 6 to exit the console connection andrestart the ERM.NOTE If you want the ERM to load the factory configuration default, type 5 to ResetConfiguration To Default. After completing all the settings, type 0 to terminate the connectionwithout starting the ERM again or type 6 to terminate the connection forcing the ERMinternal program to start again. At this point, the initial ERM configuration is complete.NOTE If you want to restore the default ERM configuration data set in the factory, type 5.