Eaton XP-503-10-A10-A01-1B Manual

Also see for 174474: Instruction leaflet

5 Commissioning and operation5.1 Adding expansions to the XP-50332 XP-503 04/2020 MN048014 EN Eaton.com5 Commissioning and operation5.1 Adding expansions to the XP-5035.1.1 General prerequisitesLimitation of LiabilityAll technical data, certifications, and approvals will cease to apply/be void if expansions other thanthose approved by Eaton are used.We will not assume liability for functional limitations resulting from the use of third-party devices andcomponents.CAUTIONAll cards and assembly parts are electrostatic-sensitive.Follow all ESD safety instructions.The symbol to the left is used to indicate the use of electrostatic-sensitivecomponents.PrecautionsCAUTIONElectronic assembly parts are extremely sensitive to electrostatic discharges.Because of this, it is necessary to take precautions whenever handling the cards.Please refer to the guidelines for electrostatic-sensitive components for moreinformation (ESD guidelines). Before plugging in or disconnecting components or expansion modules,disconnect the XP-503 from the power supply. Before plugging in the cables, you will need to bring the static charge on your bodyto the same potential as the charge on the XP-503 and the cables.To do this, briefly touch the metal housing. Discharge the electrostatic charge on your tools. Wear an anti-static wrist strap when handling components. Leave components and expansion modules in their packaging untilright before you install them. Grab components and expansion modules from the edge only –do not touch connection pins or traces. Never run the XP-503 with the housing open.CAUTIONPlease note:Only service personnel should be allowed to open the XP-503.