Eaton - Lighting Systems iLight Product Series - UIG-2 73-898-00 IM8840 Iss.02 7OperationThe UIG-2 provides the standard inputfunctions which are available from theiCANsoft application. For detailsabout the general use of iCANsoft, please referto the system Manual.In addition, the UIG-2 provides sequences andpartitioning/ room join functions.SequencesSequences allow a number of individualactions (steps) to be linked together in order tocause multiple operations from a single triggeraction.The UIG-2 provides up to 16 sequences withup to 128 steps each, with or without timedelays between steps.The iCANsoft System Manual gives moredetails on programming sequences.Partitioning/Room JoinThe UIG-2 allows for the programming ofsimple room join functions, by using partitions.The room join function operates by linkingareas.A physical room partition can be detected by aswitch on the UIG-2 inputs. When the partitionis opened, an action in one of the areas willcause the equivalent action in the other area.The UIG-2 allows 4 room joins with up to 3partitions each.A Technical Note on Room Joins andpartitioning, with examples, is available.LED Output DrivesThe unit has four LED drive outputs, each ratedat 6.7V 10mA, which can be used to give visualindication of programmed functions.The outputs will indicate input selection forthe optoisolated digital inputs when they areconfigured for scene selection.The LED outputs can also be configured fromiCANsoft for indication of other functions.LEDs are connected between the appropriateoutput and the 0V connection. Wire distancefrom the device to the UIG-2 should notexceed 10m (32 feet).