Eaton xChargeIn M Series Configuration Manual

Also see for xChargeIn M Series: Operating instructions

xChargeIn M Series Web interfaceConfiguration manual V1.04 69© EATON4 Web interfaceThe necessary settings (main menu "Configuration") for the communicationof the charging station are configured in the web interface. The configurationfor the entire charging network is done via the master charging station.A network connection is required to access the web interface of the mastercharging station. The network connection can be made via LAN, WLAN,WLAN access point or mobile communications (e.g. with PC or mobile termi-nal).The master charging station web interface can be accessed by entering theIP address of the master charging station in a web browser.The IP address of the master charging station is determined differently de-pending on the connection type.WLAN access point The IP address of the WLAN access point is printed on the con-figuration label.Router with integratedDHCP serverThe charging station automatically receives an IP address viathe DHCP server of the router. The IP address is displayed onthe charging station display when the charging station is(re)started. The IP address can also be determined via therouter.Master charging stationwith local DHCP serverThe local DHCP server has been activated for the mastercharging station, which automatically gives the master chargingstation the following IP address: 192.168.42.1The DHCP server of the charging station is deactivated in thedelivery state and can be activated via the configuration in theweb interface.A login is required to use the web interface.The login data for the first login in the web interface is printed on the configu-ration label. The configuration label is in a pouch affixed to the installationmaterials. For security reasons, change the password after the initial login.In doing so, observe the password guidelines, refer to 4.2 User menu.Fig. 4-6: Configuration labelAfter successful login, the start page of the web interface opens.