Mechanical DimensionsFigure 2.1 presents the mechanical dimensions of the PLT-22 transceiver.The PLT-22 is produced as an uncoated SIP (in contrast to the coated PLT-20 andPLT-21 transceivers).Figure 2.1 PLT-22 Transceiver DimensionsNote: If a socket is required for prototype purposes, a Mill-Max #317-93-121-41-005connector may be used. For more information, contact:Mill-Max Manufacturing Corporation190 Pine Hollow RoadOyster Bay, New York, 11771Telephone: +1-516-922-6000Fax: +1-516-922-9253Internet: http://www.mill-max.com2-2 Using the PLT-22 Transceiver