Echo CS-310 Operator's Manual
Also see for CS-310: Instruction manualInstruction manualInstruction manualOperator's manualOperator's manual
                                                            | |
Contents
| 
DESCRIPTION CS-31022 X7503275401© 02/2019 ECHO Inc.Preparation For UseSaw chain is sharp! Always wear gloves when handlingassembly, otherwise serious personal injury may result.Note: The machine may be delivered with guide bar,tip guard, and saw chain separated. Installguide bar, tip guard, and saw chain as follows.Tip Guard to Bar InstructionsTools Needed: Two 11 mm (7/16 in.)Wrenches. For saws with Tip Guard P/N2894901 and Symmetrical orAsymmetrical Low-Kick type (DoubleGuard) guide bars.1. Install bolt (A) in rear hole (B) of tipguard and through front hole (C) in guidebar.2. IMPORTANT: Dimple (D) in tip guardmust engage recess (E) in guide bar.3. Securely tighten nut (F) and bolt (A).Guide Bar and Saw Chain Installation/Removal1. Release the cylinder cover latches, and remove thecylinder cover.2. Remove spark plug lead.ABCDFE |
Related manuals for Echo CS-310
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine