Echo CS-310 Operator's Manual

Also see for CS-310: Instruction manual Instruction manual Instruction manual Operator's manual Operator's manual

Echo CS-310 Operator's Manual Manual pdf 8 page image

SAFETY CS-3108 X7503275401© 02/2019 ECHO Inc.f. Avoid cutting above shoulder height.g. Follow the manufacturer’s instructions for sharpening andmaintenance of the saw chain.13. When boring with the chain saw, the initial cut should be introducedwith the lower part of the nose (tip) until the hole is sufficiently large soas to introduce the entire nose (tip) of the guide bar. This techniqueshould reduce the danger of kickback.14. A chain saw is intended for two-handed use. Serious injury to theoperator, helpers and/or bystanders may result from one-handedoperation.a. Allow your chain saw to cool before refueling, and do notsmoke while refueling.b. Do not allow other persons or animals close to running chainsaw or close to where a tree is being felled.c. Use extreme caution when cutting small size brush andsaplings because slender material may catch the saw chainand be whipped toward you.d. When cutting a limb that is under tension be alert for spring-back.Correct Use Of Chain BrakeCHAIN BRAKE OPERATION• Set the lever in the unlockedposition before starting to cut.• If the brake is tripped by kickbackreaction, the chain will stopimmediately. Release the throttle toavoid possible damage to theengine or clutch.• Do not attempt to operate the engine with the brake locked.Locked