Echo CS-310 Operator's Manual

Also see for CS-310: Instruction manual Instruction manual Instruction manual Operator's manual Operator's manual

Echo CS-310 Operator's Manual Manual pdf 54 page image

STORAGE CS-31054 X7503275401© 02/2019 ECHO Inc.STORAGEDuring operation the muffler or catalytic muffler andsurrounding cover become hot. Always keep exhaust area clearof flammable debris during transportation or when storing,otherwise serious property damage or personal injury mayresult.Long Term Storage (Over 30 Days)Do not store your unit for a prolonged period of time (30 days or longer)without performing protective storage maintenance which includes thefollowing:1. Store unit in a dry, dust free place, out of the reach of children.Do not store in enclosure where fuel fumes may accumulate orreach an open flame or spark.2. Place the stop switch in the “OFF” position.3. Remove accumulation of grease, oil, dirt and debris from exterior ofunit.4. Perform all periodic lubrication and services that are required.5. Tighten all the screws and nuts.6. Drain fuel tank completely. Press purge bulb 6-7 times to removeremaining fuel from carburetor then drain the tank again. Close choke,start and run the engine until it stops due to lack of fuel.7. Allow engine to cool. Remove the spark plug lead from the spark plug.Remove the spark plug. Pour 7 cc (0.25 oz.) of fresh, clean, two-strokeengine oil into the cylinder through the spark plug hole.8. Pull the recoil starter handle 2-3 times to distribute the oil inside theengine.9. Observe the piston location through the spark plug hole. Pull the recoilhandle slowly until the piston reaches the top of its travel and leave itthere.10. Install the spark plug. Connect the spark plug lead to the spark plug.