Echo CS-800P Instruction Manual

Also see for CS-800P: Operator's manual

Echo CS-800P Instruction Manual Manual pdf 15 page image

13 CS-800PHANDLING FUELMIXING INSTRUCTIONS -1. Fill an approved fuel container with half of therequired amount of gasoline.2. Add the proper amount of two-stroke oil togasoline.3. Close container and shake to mix oil withgasoline.4. Add remaining gasoline, close fuel container,and remix.IMPORTANTs3PILLEDFUELISALEADINGCAUSEOFHYDROCARBONemissions.Some states may require the use of automaticfuel shut-off containers to reduce fuel spillage.s3TOREDFUELAGESDo not mix more fuel than you expect to use inthirty (30) days, ninety (90) days when a fuelstabilizer is added.s3TOREDTWO STROKEFUELMAYSEPARATEAlways shake fuel container thoroughly beforeeach use.AFTER USE -Do not store a unit with fuel in its tank. Leaks canoccur. Return unused fuel to an approved fuelstorage container.STORAGE -Fuel storage laws vary by locality. Contact yourlocal government for the laws affecting your area.As a precaution, store fuel in an approved, airtightcontainer. Store in a well-ventilated, unoccupiedbuilding, away from sparks and flames.DANGERFuel is very flammable. Use extreme carewhen mixing, storing or handling or seriouspersonal injury may result.• Use an approved fuel container.• Do not smoke near fuel.• Do not allow flames or sparks near fuel.• Fuel tanks/cans may be under pressure.Always loosen fuel caps slowly allowingpressure to equalize.• Never refuel a unit when the engine is hot!• Never refuel a unit with the engine running.• Do not fill fuel tanks indoors.Always fill fuel tanks outdoors over bareground.• Securely tighten fuel cap after refueling.• Inspect for fuel leakage.If fuel leakage is found, do not start oroperate unit until leakage is repaired.• Move at least 3 m (10 feet) from refuelinglocation before starting the engine.EMISSION DATAEMISSION CONTROL(EXHAUST and EVAPORATIVE) EPA 2010 and/or C.A.R.B. TIER IIIThe emission control system for the engine is EM/TWC (Engine Modification and 3-way Catalyst)and for the fuel tank the Control System is EVAP(Evaporative Emissions) or N (for nylon tank).Evaporative emission may be applicable toCalifornia models only.An Emission Control Label is located on theengine. (This is an example only, information onlabel varies by engine family).PRODUCT EMISSION DURABILITY(EMISSION COMPLIANCE PERIOD)The 300 hours emission compliance period isthe time span selected by the manufacturercertifying the engine emissions output meetsapplicable emissions regulations, provided thatapproved maintenance procedures are followedas listed in the Maintenance Section of thismanual.EMISSION CONTROL INFORMATIONENGINE FAMILY: #EHXS.0815RB DISPLACEMENT: 80.7 ccEMISSION COMPLIANCE PERIOD: 300 HoursTHIS ENGINE MEETS U.S. EPA EXH/EVP EMISSIONREGULATIONS FOR MODEL YEAR * * * * REFER TO OWNER’S MANUALFOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.* * * ? ? ? ?