Echo HCA-265 Operator's Manual

Also see for HCA-265: Spesifications Operator's manual

14rotate cutter assemblyAlways use the unit from the right-hand side of your body – NEVERfrom the left side. Rotate cutter assembly 180 degrees on driveshaft inorder to avoid cutting directly above your head, and to avoid contactwith hot muffler.1. Loosen gearcase clamping screw (A), hand guard clamping screw(B), and remove gearcase locating screw (C).2. Rotate cutter assembly 180-degrees on driveshaft until locatinghole in driveshaft is visible through locating hole in gearcase.3. Install gearcase locating screw (C), and securely tighten all hard-ware.warningHedge Clipper blades are very sharp. Wear gloves to protect handswhen rotating cutter assembly or serious personal injury mayresult.warningDuring operation, the complete unit, especially the drive shafthousing and gearcase may become too hot to touch. Avoid contactwhen rotating cutter assembly.startIng cold engIneNOTEThe blade cover is used for transportation and storage. Removeblade cover before using the unit.warningThe attachment will operate immediately when the engine startsand could result in loss of control and possible serious injury. Keepmovable parts of the attachment off the ground and away fromobjects that could become entangled or thrown.1. Stop SwitchMove stop switch button (A) forward away from the STOPposition.2. Close ChokeMove choke lever (B) to Cold Start ( ) Position.aB CCDaB