Echo HCA-265 Operator's Manual

Also see for HCA-265: Spesifications Operator's manual

Shaft hedge Clipper 23OperatOr’S ManuallubrIcatIonBladesLevel 1.Tools Required: Clean rag, brush , oil canParts Required: 20W Engine Oil (lubrication), 50-50 mixture ofkerosene and 20W oil (cleaning)warningAlways disconnect spark plug wire before servicing cutting at-tachment. Blades are very sharp. Wear gloves to protect hands,otherwise serious personal injury may result.1. Brush loose debris from blade and coat both sides of blade with the50-50 cleaning mixture.2. Allow cleaning mixture to soften the remaining gummy residuethen wipe it from the blade.3. Apply clean oil to the entire length of the blade. Be certain theblade bolts are lubricated.4. Wipe excess oil from the blade before putting the unit back in ser-vice.Gear Housing AssemblyLevel 2Tools required: Grease gun, ragParts required: POWER BLENDX TM 14 oz. cartridge P/N 91015 orLithium Based Grease1. Clean dirt from grease fittings (A).2. Carefully pump grease in each fitting (A). DO NOT force grease.Too much pressure will force grease past seals and cause damage.Apply 1-2 pumps of grease every 15-25 hours of operation.aa